By Pete Vack
From the Archives, September, 2012
Millenove ALFA ROMEO 1900
Author: H.-J. Döhren
320 pages, 25 x 28 cm hardcover format, printed on 150 g/m² art paper, with about 700 large format illustrations
From Europe, order here: https://www.millenove.de/buecher-bestellen
From U.S. order from don@bugattibooks.com at 941-727-8667
This review covers the first edition. The second edition of this successful work has been completely revised, many photos exchanged and the layout has also been improved.
There has been a gap in the Alfa Romeo bookshelf for many years, right between the 6C2500 and Alfa Disco Volante. A small gap but a huge subject, for the missing model is nothing less than the car that saved Alfa Romeo and set the path for the manufacturer’s ultimate post war success, the Giulietta. The 1900 (aka Millenove—which is a shortened version of the Italian for nineteenhundred) served as a bridge from Alfa Romeo’s glorious prewar past, to the exciting future that lay ahead. Its success was crucial to the survival of Alfa Romeo.
This gap has now been filled, most admirably in fact, by a German Alfa enthusiast H.-J. Döhren, who became enamored with 1900 Alfas, obtaining first a Military version, then a PF 1900C and a Touring coupe. While restoring the cars, he naturally noted the dearth of material and books on the 1900…the last anywhere near comprehensive work was Alfa 1900 Sprint, published only in Italian, almost 30 years ago! As he accumulated material from a wide variety of sources, he soon had enough for a book.
Long awaited, Döhren’s book finally arrived here and we immediately tore into it. One garners a first impression, and a quick scan through the pages is usually enough to determine if this book is worth living with…and paying for. First we noticed the lack of a slipcover…not that we enjoy slipcovers, (they get damaged too easily) but for the upscale style of the book it was strange not to include a glossy jacket. (our copy did not have a jacket but the author told us that the first 200 do have very elegant slipcases). Paging through, we noted good quality backing, bounding, paper and layout, creative in spite of the difficult logistics of placing both German and English texts in proper order on the page. Döhren began with a thankfully short Alfa overview (we are saved from yet another history of the company!) and then got right to the heart of the matter, the development of the 1900 Berlina.
The section appeared complete, relevant and well done, covering all aspects of the car aside from the transmission (why not?). Good so far, said we and thumbed through the first seventy pages of chunky Berlinas. A lot of factory photos, many brochures, photos of a few contemporary restored examples, and yet, not nearly enough photos of restored or original cars, engines, interiors, trunks, and details. There are tech specs and original road tests, but reprinted still in the original German language.
Then something magical happened. I now noted the appearance of the Primavera – a car previously covered in VT by Brandes Elitch..(1900 Primavera) and here before us was the details on that very special two-door Alfa sedan, followed by photos and brochures for the Primavera…a minor revalation and most welcome information.
What came next was even more pleasing. Döhren had arranged the content to first cover the Berlina, and then the special bodied Alfa 1900s by coachbuilder. With all due respect to the Berlina, the 1900’s true legacy lies with the special short chassis wire wheel-shod, highly-modified Alfas provided to seventeen different coachbuilders from 1953 to 1958. Bodied by Bertone, Boano, Boneschi, Castagna, Colli, Frua etcetera, these were the cars that graced the Auto shows with designs that ranged from the extremely unattractive to the extreme and beautiful Alfa B.A.Ts (so taken are we with the coachwork that it is easy to forget the 1900 underpinnings). With this, the remaining 250 pages of the book came to life; each page was better than the last, each leaf a delight of various special bodied Alfas. It is nice to be truly excited over a book. We were.
Speaking of the 1900 Register, while there are many photos of many of the special bodied cars along a special chapter on serial numbers, there are no individual histories of each car and that given the huge numbers, would not be expected here. That is left to the Alfa1900 Register.
Coincidentally, while we were writing this review, long time VeloceToday reader Don Falk happened to email us about an Alfa 1900 PF cab he once owned. His story follows this review (don’t miss it), and we found mention of his chassis number in the Millenove book, as well as on the 1900 Register.
As we mentioned, the coachbuilder chapters make up the essence of the book. Sections on Pinin Farina, Touring and Zagato are the most complete, the chapters on Ghia Aigle and Boano perhaps the most interesting. Photos of both contemporary restorations and original factory photos are included as often as possible. Looking at the all- important serial numbers, one starts from the number of Corto chassis made by Alfa Romeo, totaling about 1790 of all series and types. These were sorted out to the seventeen or so coachbuilders, with Touring building some 1480 coupes on a short chassis frame and a few convertibles and comp cars. Peter Marshall of the Alfa Register (who also wrote the forward to the book) figures only 20-25 percent of those Touring chassis have been found and confirmed, so many have gone by the wayside but many are yet to be discovered and registered. Pinin Farina is figured to have built about 188 coupes and cabriolets on the C (short wheelbase) chassis. Zagato produced about 40 coupe and two spiders from 1954 to 1958. The rest of the run was taken up by smaller coachbuilders, who might have done 3-10 examples on the short chassis. Of course, there were also special bodies constructed for the 1900L chassis as well; they too are covered in the appropriate chapters but the numbers are tiny.
But If you are looking for a complete list of chassis numbers, histories, body types, all in a neat little row, ala “Ferrari by Vignale” – it may never happen and this volume will be the best hard copy guide out there for a long, long while, aside from Internet sources and the 1900 Register itself.
A section on restoration is interesting but relates nothing much new in terms of describing the pitfalls of restoring a fifty-year-old Italian aluminum and steel vehicle, lacking parts, patterns, photos, materials, bodywork books, etc. It does demonstrate the necessary art of a full body off restoration, separating the skin from the Superleggera-type framework common to most of the Touring bodied 1900s. The author has had several restored, one a prize-winning drop-dead gorgeous PF coupe, so knows the ropes well. Fortunately, or unfortunately, prices have gone through the roof on these once neglected classics…making proper frame up restorations more frequent and today one might even break even on such a project. On the question of prices, they are all over the map and no price guide is offered; suffice to say that a restored Ghia SS sold in 2005 for $175,000 and in 2012 was again for sale at $350,000.
Chapters on replicars, cars with 1900 DNA (Sportiva, CM 3000s, etc), books and articles available about the 1900 series, and a chapter on the Military four wheel drive version, oddly named “Le Matta” or ‘the crazy’(the first 1900 owned by Döhren) and even a look at the oddly rare Rio 2300 wrap up the book in fine fashion.
, for the most part in colour. Many of them previously unpublished. The book is available in a limited edition about only 1000 copies. There are a few translations glitches here and there, and a missing second part to a sentence on page 32, for one of several. The explanation and description of serial numbers, placement, meanings and importance is far too brief. The layout isn’t always picture perfect. Text in German on one line and English the next can be disconcerting. It would be advisable for those who want specific information on a coachbuilder or particular chassis number to check with the author or the Alfa 1900 Registry for updates and or corrections.
The author, H.- Jürgen Döhren, is a well-known Alfa Romeo expert and has already contributed to several Alfa Romeo publications. He is a committed member of the German Alfa Romeo clubscene since 30 years, and he restores 1900 models in his garage and maintains an extensive Alfa archive.
An Alfa Romeo 1900C Pinin Farina Remembered
by Donald Falk
A new chapter in my car life began when I tired of the Dauphine I owned, and longed for something more sporty and exotic. As fortune would have it, at that time I learned of two gentlemen, named Bonnano and Drinkwater, who had imported three interesting cars from Italy.
Tony Bonnano had been a mechanic in the Alfa racing department, and Drinkwater was the businessman. They offered me the choice of the three, and a cooperating dealer offered to take the Dauphine in trade. The cars available were a Maserati A6GCS 2 liter coupe, a 1954 Alfa 1900C cabriolet, and a 1938 BMW 328 roadster. My experiences with the Singer and the HRG led me to shy away from roadsters, and the Alfa had a back seat. The car was black, and was quite striking, with is 26 inch Borrani wire wheels and Pinin Farina coachwork. It also had a 2 liter dual cam six and Weber carbs, and make a beautiful noise when accelerating. I don’t know what had been done to it in Italy, but it always seemed to prefer accelerating.
Driving it on a highway, I would be travelling at a fairly reasonable speed, and the car would seem to feel a little rough. This was easily cured by stepping on the gas pedal. This behavior became a cycle until I looked at the speedometer and saw that my speed was approaching 120 MPH. Even when travelling through a small town in Westchester County, NY, at moderate speed, the exhaust noise of the car seemed to draw attention. On that occasion, I found that I was being trailed by two local police cars.
The Alfa was comfortable, and handled very well, but was afflicted by a few problems. The first difficulty to appear was the deterioration of the wiring insulation throughout the car. This was not a serious problem for me, as I was good at electrical troubleshooting and repair. The next problem was a “clunking” sound when I engaged the clutch, so I changed the clutch, which did not solve the problem, which persisted. I later learned that these cars had several rubber bushings, which when they rotted, had allowed the rear axle assembly to move when torque was applied.
The final problem was a weak rear axle shaft, which broke. Replacements were not available. The closest thing we could find was a Ford axle shaft, which could be cut and milled to match the splines on the Alfa. Fortunately, the bolt pattern on the hub was identical. I was enjoying the car when I came to the attention of my local draft board, and was forced to join the military reserves. As my call to active duty was eminent, I had to sell the Alfa. I found a buyer, and later consoled him about the valve noise from the engine. The recommended exhaust valve clearance was .027” so the noise was native to the beast. The valves in the Alfa were sodium cooled and were a three piece design which allowed simple adjustment. But did he listen? The new buyer tightened the valve lash to quiet the noise, and promptly burned out all of these high priced valves.
The engine number was 1308.00074, and the chassis number was 01104. I Incidentally, when the new clutch failed to solve the problem, my rather emotional mechanic at Maserati was weeping on my fender, trying to explain that to me. My relationship with Maserati had continued, and they were the ideal shop to repair the Alfa. I also was able to purchase scuffed Pirelli Stelvio Corsa tires from them, when the factory team returned from Sebring. By then, they had moved to a larger shop in Glen Cove, NY.
Upon receiving Don’s photo, Peter Marshall replied: “*01104* still exists in the ‘States, (in Burlingame CA) nearing completion of its restoration, after many years by its present owner.”
Peter Marshall says
“With all due respect to the Berlina, the 1900’s true legacy lies with the special short chassis wire wheel-shod”
is not something with which I would agree, The 1900’s reputation was very much endorsed by “the family car that wins races”. Indeed it was the quick TI version of the family saloon that won races. The 1900C had several rivals, so their competitive success was shared. Amongst old factory employees the 1900 is fondly remembered as being a thoroughly good car.
Your statement of “only 20-25 percent of those Touring chassis have been found and confirmed”
has one serious glitch. The word ‘only’; the survival rate of a car with a steel platform (not, remember, a chunky ladder frame chassis) is really quite remarkable. Perhaps compare that statement with ANY other car.
“Fortunately, or unfortunately, prices have gone through the roof on these once neglected classics” agreed, out of the hands of the impecunious dirty finger-nails enthusiast, whilst the advantage is that it is now more feasible to have multiples of parts re-manufactured rather than one-0ffs.
Don Falk’s super article has one belief untrue:
“The valves in the Alfa were sodium cooled and were a three piece design which allowed simple adjustment”.
50 years ago, when bought my present 1900C and knew even less about engines than I now do, that was what I alsp believed. Right back to the straight eights, and 6c2300/2500s, Alfa used adjustable length valves, that were NOT sodium cooled. I still find it unimaginable that any valve on a fairly normal car, can go up and down at 400,000 times per SECOND.
Peter
pete says
Peter,
Thanks for your input! Sounds like we should do a series of updated articles on aluminum and valve technology as used by Alfa over the years!
Pete