• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

VeloceToday.com

The Online Magazine for Italian and French Classic Car Enthusiasts

  • Home
  • Subscribe
  • About
  • Contact
  • Donate
  • As Found

Alfa replica racer

Past and Present Alfa Part 3: Final Details

November 17, 2015 By pete

lead-570-text

Photos by David Gooley

Read Part 1
Read Part 2

Final Details

With the mechanicals completed and the chassis painted, the body sections were installed and final prep began. The location of head lights and taillights were determined, and the modifications made to front and rear fenders. To keep the front-end design as clean as possible, turn signal fixtures were installed in the head light buckets. With the headlight buckets welded in place, weeks of aligning, filling, and sanding followed until a coat of primer could be applied. In this state, devoid of any distracting trim pieces, the virgin bodylines could be evaluated for balance, proportion, and overall conformation.

This content is for Premium Subscriber members only.
LoginSubscribe

Tagged With: Alfa 6cm3000, Alfa replica racer, Alfa Romeo replica, Alfa sports racer, building an Alfa replica race car, Building an Alfa Sports Racer

Past and Present Alfa Part 2

November 10, 2015 By pete

final-lead

In Part 1 Restoration expert Alex Bacon begins a project to create a 1950s era-Sports Racer based on Alfa 2600 components. After completing the chassis the body is now taking shape.

Photos courtesy Alex Bacon

Next came a classic use of CAD-derived inspiration; CAD, meaning Cardboard Aided Design, in which cardboard templates are cut for front fenders, hood, cowl, doors, rear fenders, and trunk to quickly simulate the body shape. The cardboard templates were revised multiple times until a satisfactory shape was achieved. Plywood forms fashioned from the cardboard templates were installed to provide references for body panels and the locations for the small diameter tubing to support them.

fgsdgf

The initial template for the rear section is place over the frame.

[Read more…] about Past and Present Alfa Part 2

Tagged With: Alfa 6cm3000, Alfa replica racer, Alfa Romeo replica, Alfa sports racer, building an Alfa replica race car, Building an Alfa Sports Racer

Primary Sidebar

     SIGN UP BELOW TO RECEIVE VELOCETODAY EVERY WEEK FOR FREE

         

       EXCLUSIVE ARTICLES ABOUT 

    EXTRAORDINARY AUTOMOBILES

PositiveSSL

Recent Posts

  • VeloceToday for November 17, 2026
  • Ferrari Behind the Fence 1963 P2
  • Fondazione Marazzato, Vercelli, Piemonte
  • Heavy Metal at Auto Moto d’Epoca
  • And How! Brinker, Piltch and Brock
  • Auto Moto d’Epoca: Editor’s Choice
  • Auto Moto d’Epoca: Rest of the Best
  • WEC Barcelona 6 Hours, Hypercars
  • WEC Barcelona 6 Hours, LMGT3s
  • Jack Deren: From Hot Rods to Can Am
  • Citroën Museum in Castellane
  • Ferrari at Sebring, 1963 Part 1
  • The Life of a Birdcage P1
  • The Life of a Birdcage P2
  • Paul Arzens and The Whale
  • Selling a Classic? Here’s Help
  • Shannons Adelaide Rally, 16-18 October 2026
  • The Louwman Museum with Hugues Vanhoolandt
  • Two Bandinis for Your Pleasure
  • Zoute Grand Prix 2026
  • All Italian Day Car and Motorcycle Show
  • Introducing Bob Goldberg
  • Simply Italian at Beaulieu National Motor Museum
  • Pegasos in New York
  • Hampton Court Concours, French and Italian
  • Hampton Court Concours, British and Other
  • Chantilly Arts & Elegance 2026
  • A Whimsical Goodwood Revival
  • French and Italian Classic Cars at the Goodwood Revival Car Show
  • And How! Murphys’ Concours d’ Elegance

Copyright © 2026 · VeloceToday.com · Privacy · Sitemap

MENU
  • Home
  • Subscribe
  • About
  • Contact
  • Donate
  • As Found